KFD2-SCD2-Ex2.LK| Pepperl+Fuchs

SMART Current Driver

 KFD2-SCD2-Ex2.LK

 <2-channel isolated barrier

 <24 V DC supply (Power Rail)

 <Current output up to 650 Ω load

 <HART-IP and valve positioner

 <Line fault detection (LFD)

 <Accuracy 0.1 %

 <Up to SIL 2 (SC 3) acc. to IEC/EN 61508

Function

This isolated barrier is used for intrinsic safety applications.

 The device drives SMART I/P converters, electrical valves, 

and positioners in hazardous areas.Digital signals are superimposed 

on the analog values at the field side or control side and are 

transferred bi-directionally.Current transferred across the DC/DC 

converter is repeated at terminals 1, 2 and 4, 5. Terminals 2, 3 and 5, 6 

are used when no short circuit detection is required.An open or 

short field circuit presents a high impedance to the control side 

to allow alarm conditions to be monitored by the control system.

 If the HART communication resistance in the loop is too low, 

the internal resistance can be used.Test sockets for the connection 

of HART communicators are integrated into the terminals of the device.

 A fault is signalized by LEDs and a separate collective error message output

 Operation

Lead monitoring, input characteristics

 During lead breakage (> 16 V) in the field the input resistance is > 100 kΩ, 

the field current is 0 mA, the input current is < 0.3 mA and the red LED is flashing.

 During short circuit (< 50 Ω) in the field the input resistance is > 100 kΩ,

the input current is < 100 μA, the field current is < 2.5 mA and the red LED is flashing.

 The voltage drop at the current input (terminals 7-, 8+ and 10-, 11+) is lower than 6 V.

HONGKONG XIEYUAN TECH CO., LIMITED

ava.wong@hkxytech.com

Mob/WhatsApp: 86-15602323637

KFD2-SCD2-Ex2.LK| Pepperl+Fuchs