PSE250-600-70-1|ABB
General Information
Global Commercial Alias:PSE250-600-70-1
Extended Product Type:PSE250-600-70-1
Product ID:1SFA897113R7001
Product Net Width: 190 mm
Product Net Height: 435 mm
Product Net Depth / Length: 237 mm
Product Net Weight: 10.6 kg
ABB Type Designation:PSE250-600-70-1
EAN:7320500515037
Catalog Description:PSE250-600-70-1 Softstarter - 250 A - 208 ... 600 V AC
| Ordering | Minimum Order Quantity: | 1 piece |
| Customs Tariff Number: | 85371091 | |
| Dimensions | Product Net Width: | 190 mm |
| Product Net Height: | 435 mm | |
| Product Net Depth / Length: | 237 mm | |
| Product Net Weight: | 10.6 kg | |
| Technical | Communication: | Modbus-RTU |
| Degree of Protection: | acc. to IEC 60529, IEC 60947-1, EN 60529 Main Terminals IP00 | |
| Terminal Type: | Main Circuit: Bars | |
| Product Main Type: | PSE250 | |
| Function: | Soft start with torque control Soft start with voltage ramp Soft stop with torque control Soft stop with voltage ramp Kick start Sequence start Current limit Start reverse (external contactors) Automatic restart Event log | |
| Protection Function: | Electronic overload protection, EOL; Locked rotor protection; Current underload protection | |
| Environmental Signals | Ambient Air Temperature: | Operation -25 ... +60 °C Storage -40 ... +70 °C |
| Container Information | Package Level 1 Width: | 261 mm |
| Package Level 1 Depth / Length: | 325 mm | |
| Package Level 1 Height: | 510 mm | |
| Package Level 1 Gross Weight: | 13.3 kg |
Long Description:
The softstarter PSE250-600-70-1 has a rated maximum operational current of
250 A with an operating voltage span from 208...600 V AC. The rated control voltage
is between 100...250 V AC at 50/60 Hz. PSE features a two-phase control with a soft
start and stop through a voltage or a torque ramp. It has built-in bypass for
easy installation and energy saving. A RUN, TOR, and Event signal is available from
a relay output in NO (normally open state). The PSE has functions such as current limit,
kickstart, analog output, EOL, underload, and locked rotor protection. To interact with PSE,
it has an Illuminated display that uses symbols to become language neutral. As an option,
you can add an identical external keypad with a rating of IP66. There are three ways to
communicate with PSE. It can be done by hardwire inputs Start/Stop or by Reset of fault.
Another popular option is the built-in fieldbus communication Modbus RTU.
You can also use an external adaptor and a Fieldbus plug. PSE is a true general purpose softstarter.
It’s a perfect balance between high starting capacity and cost efficiency.
Very suitable for small to medium-sized three-phase motors with nominal currents from 18...370 A.
Typical applications are, for example, pumps, fans, compressors, and conveyors.
HONGKONG XIEYUAN TECH CO., LIMITED
ava.wong@hkxytech.com
Mob/WhatsApp: 86-15602323637
PSE250-600-70-1|ABB
