IMX12-TI02-1TCURTDR-1I1R-CPR/24VDC/CC Temperature Measurement Amplifier TURCK

IMX12-TI02-1TCURTDR-1I1R-CPR/24VDC/CC Temperature Measurement Amplifier TURCK

Model: IMX12-TI02-1TCURTDR-1I1R-CPR/24VDC/CC

Supplier: Products

Categories: TURCK

After sales service. If you have any questions, click here.

PRODUCT DESCRIPTION

IMX12-TI02-1TCURTDR-1I1R-CPR/24VDC/CC Temperature Measurement Amplifier TURCK

  • General Information


 The single-channel temperature measuring amplifier IMX12

TI02-1TCURTDR-1I1R-CPR/24VDC/CC has inputs for: thermocouples according to IEC 60584, DIN 43710,

GOST R 8.585-2001, low voltage (-150 …+150mV), RTD according to IEC 60751, DIN 43760, GOST

6651-94 (2-, 3- and 4-wire) and resistors 0…5 kò (2-, 3- and 4-wire). 

The device can be powered via a power bridge, which can also transmit a collective fault signal.

The cold junction compensation can be set to an external value, an internal value or a constant value. 

The device is configured via the PC interface. The current output can be set to 0/4 …

20mA source or sink. The device has an additional reversible switching 

relay output for monitoring overvoltage or undervoltage or window function limit values.

The green LED indicates that the product is operating normally.

Input circuit faults cause the red indicator to flash, according to NE44, the internal

error red readable indicator is stable. The fault current can be adjusted <

3.5 mA or > 21.5 mA.

Edition • 2025-02-28T18:43:01+01:00

■ Open/short circuit monitoring of input circuits

The device can be used (according to high and low requirements of IEC61508) in safety circuits up to SIL2 and meets the requirements of NE21.

Equipped with removable cage clamp terminals.

The device can be used in safety circuits with SIL 2 certification (high/low level safety requirements in accordance with IEC 61508) (hardware

fault tolerance HFT = 0).

The device is equipped with removable spring clamp terminals.

■ Parameter setting via PC

■ Intrinsically safe output circuits

■ Plug-in cage clamp terminals

■ Power bridge (connector included in delivery)

■ ATEX, IECEx, cFM, cUL, NEPSI, INMETRO, Kosha, TS

■ Usage in hazardous area zone 2

■ SIL


  •  Technical Parameters:


Model: IMX12-TI02-1TCURTDR-1I1R-CPR/24VDC/CC

Article No. 7580506

Operating voltage 24 VDC

Operating voltage UB

10…30 VDC

Power consumption ð 2 W

Typical power loss ð 1.6 W

Input circuit RTD type DIN EN 60751 Pt50, Pt100, Pt 500, Pt1000

RTD type DIN EN 43760 Ni50, Ni100, Ni500, Ni1000

RTD type Gost 6651-94 Pt50, Pt100, Pt 500, Pt1000,

CU50, Cu53, Cu100, CU500, CuZn100

TC type DIN EN 60584 Type A, Type B, Type C, Type E, Type J, Type K

Type, Type N, Type R, Type S, Type T

Type TC DIN 43710 Type L

Type TC Gost 8.585-2001 Type A1, Type A2, Type A3, Type L, Type M

Low voltage input -150…150 mV

Input resistance 0…5000 ò

Thermocouple -50…200°C; 0…400°C; 0…600°C


HONGKONG XIEYUAN TECH CO., LIMITED

ava.wong@hkxytech.com

Mob/WhatsApp: 86-15602323637


IMX12-TI02-1TCURTDR-1I1R-CPR/24VDC/CC Temperature Measurement Amplifier TURCK

IMX12-TI02-1TCURTDR-1I1R-CPR/24VDC/CC Temperature Measurement Amplifier TURCK

Related Products

WRITE TO US

ava.wong@hkxytech.com

MOBILE PHONE

+86 15602323637

CONTACT ADDRESS

7-A16,Caishen Commercial Plaza, Hankou Railway Station,Wuhan, China

HONGKONG XIEYUAN TECH CO., LIMITED is not an authorized reseller, agent or affiliate of any brand or manufacturer. All trademarks, brand names and logos whose products are sold on the website are used for identification purposes only and are registered trademarks of their respective owners, all rights reserved. The use of a trademark, brand name or product on our website does not imply that the company trademark or brand belongs to or endorses our website. All products are 100% original, genuine and legally purchased from authorized sources.