SPXCDALMO1M Honeywell Sensepoint XCD Gas Detector

SPXCDALMO1M Honeywell Sensepoint XCD Gas Detector

Model: SPXCDALMO1M

Supplier: Products

Categories: Honeywell

After sales service. If you have any questions, click here.

PRODUCT DESCRIPTION

SPXCDALMO1M Honeywell Sensepoint XCD Gas Detector


  • General Specification


Sensepoint XCD Transmitter.


Use 

3-wire, 4-20 mA, gas detector transmitter for use with directly installed flammable and toxic gas sensors. For the 

protection of personnel and plant from flammable and toxic gas hazards. 


Electrical  

Input Voltage Range: 16 to 32 Vdc (24 Vdc nominal) for ATEX/IECEx/AP Versions 

12 to 32 Vdc (24 Vdc nominal) for UL/CSA version 

Max Power Consumption: Max 5 Watts. at 24 Vdc (see chapter 2 regarding maximum in rush 

current) Current output 4-20 mA (Source or Sink) 

≥0.0<1.0 mA Fault (refer to table 5 chapter 11.3 for further details). 

4.0 mA to 20.0 mA Normal gas measurement 

2.0 mA or 4.0 mA (17.4 mA)   Inhibit (during configuration/user settings) 

22.0 mA Maximum over range 

Max load resistance 250 Ω 

Terminals 15 x screw terminals suitable for wire diameter 0.5 mm2 to 2.5 mm2 (20 AWG 

to 13 AWG). 

Relays 3 x 5 A@250 VAC. Selectable normally open or normally closed (switch) and 

energized/de-energized (programmable). 

Communication RS485, Modbus RTU 


Construction

Material Epoxy painted aluminium alloy or 316 Stainless Steel 

Weight Aluminum alloy: 1.7 kg, 316 Stainless Steel: 3.7 kg 

Mounting: Pole or wall mounting 

Entries 2 x M20 (for ATEX/IECEx/AP Approval) or 2x3/4’ NPT (for UL Approval)  


Environmental

IP Rating: IP66 in accordance with EN60529:1992 

Operating Temperature: -40ºC to +75ºC/ -40ºF to +167ºF 

Note: The detector display may become illegible at temperatures below -40°C, but the detector continues its gas 

monitoring function. The display is not damaged and recovers when the temperature rises back above -20 °C. 

Operating Humidity: Continuous 20-90 % RH (non-condensing), Intermittent 10-99 % RH (non-condensing) 

Operating  Pressure:  90-110 kPa (EC Toxic Sensors), 80-120 kPa (EC Oxygen, Catalytic Bead and Infrared Sensors) 

Storage Conditions (detector and accessories): -25°C to +65°C (-13°F to +149°F)


HONGKONG XIEYUAN TECH CO., LIMITED

ava.wong@hkxytech.com

Mob/WhatsApp: 86-15602323637



SPXCDALMO1M Honeywell Sensepoint XCD Gas Detector

SPXCDALMO1M Honeywell Sensepoint XCD Gas Detector

Related Products

WRITE TO US

ava.wong@hkxytech.com

MOBILE PHONE

+86 15602323637

CONTACT ADDRESS

7-A16,Caishen Commercial Plaza, Hankou Railway Station,Wuhan, China

HONGKONG XIEYUAN TECH CO., LIMITED is not an authorized reseller, agent or affiliate of any brand or manufacturer. All trademarks, brand names and logos whose products are sold on the website are used for identification purposes only and are registered trademarks of their respective owners, all rights reserved. The use of a trademark, brand name or product on our website does not imply that the company trademark or brand belongs to or endorses our website. All products are 100% original, genuine and legally purchased from authorized sources.